SCADA Vio Lift Station Controller
The SCADA Vio is designed specifically for lift and pump stations, with a standard lift station application built in. The Vio accommodates multiple pumps and floats and is well suited for retrofitting obsolete controls – providing the flexibility to control your equipment where and how you need it.
Technical Specifications
Part No.
SCADA Vio
Physical
Dimensions: 6.7″ W x 4.5″ H x 2.7″ D
Weight: 2.5 lb
Environmental
Operating Temperature: -20°C to 60°C
Storage Temperature: -25°C to 80°C
Microcontroller
ARM7 32-bit
Memory
4 MB RAM data
4.5 MB flash program storage
Power Input
90 to 150 VRMS, 6 W
Network Connections
10/100 Mbps Ethernet
3 x RS-485
1 x RS-232/RS-485
Inputs
Analog:
(2) 4-20mA [5000VAC isolation]
Digital:
(5) 120VAC [5000VAC isolation]
(4) dry-contact/OC
Digital Outputs
(5) relay (SPDT) [5000VAC isolation]
2A @ 120VAC (inductive)
5A @ 120VAC (resistive)
Specifications subject to change without notice
Easy to Install
DIN rail-mounted design is locally customizable with a pluggable terminal for quick installation.
Easy to Service
AC-line powered, with battery-backed calendar and clocks.
Features + Benefits
- Cloud and stand-alone modes
- 9 digital and 2 analog inputs
- 5 digital outputs
Parameters:
- Transducer failure mode
- Pump sequence delay
- Maximum pump off time
- Pump run alarm time
- Pump flow rate for calculating total flows
- Light, horn, and auxiliary alarm outputs supported
Alarms:
- High level/low level
- Pump 1 or 2 fail start or stop
- Pump 1 or 2 run time exceeded
- Float stuck and/or level
- Transducer failure