Products /

SCADA Vio Lift Station Controller

SCADA Vio Lift Station Controller

The SCADA Vio is designed specifically for lift and pump stations, with a standard lift station application built in. The Vio accommodates multiple pumps and floats and is well-suited for retrofitting obsolete controls — providing the flexibility to control your equipment where and how you need it.

Technical Specifications

Part No.
SCADA Vio

Physical
Dimensions: 6.7”w x 4.5”h x 2.7”d
Weight: 2.5 lb

Environmental
-20°C to 60°C operating
-25°C to 80°C storage

Microcontroller
ARM7 32 bit

Memory
4 MB RAM data
4.5 MB flash program storage

Power Input
90 to 150 VRMS, 6W

Network Connections
10/100 Mbps ethernet
3 x RS-485
1 x RS-232/RS-485

Inputs
Analog:
(2) 4-20mA [5000 VAC isolation]

Digital:
(5) 120 VAC [5000 VAC isolation], (4) dry-contact/OC

Digital Outputs
(5) relay (SPDT) [5000 VAC isolation]
2A @ 120 VAC (inductive)
5A @ 120 VAC (resistive)

Specifications subject to change without notice

Easy to Install

DIN rail-mounted design is locally customizable with a pluggable terminal for quick installation.

Easy to Service

AC-line powered, with battery-backed calendar and clocks.

Features + Benefits

  • Cloud and stand-alone modes
  • 9 digital and 2 analog inputs
  • 5 digital outputs

Parameters

  • Transducer failure mode
  • Pump sequence delay
  • Maximum pump off time
  • Pump run time alarm
  • Pump flow rate for calculating total flows
  • Light, horn, and auxiliary alarm outputs supported

Alarms

  • High level/low level
  • Pump 1 or 2 fail start or stop
  • Pump 1 or 2 run time exceeded
  • Float stuck and/or level
  • Transducer failure

Comparison

Controller Inputs Outputs Keypad
SCADA Vio Lift Station Controller 9 digital / 2 analog 5 digital 6-button
MicroScan 5 Universal Controller 16 universal 8 digital / 8 analog 6-button
SCADA IO Universal Controller 8 universal input/output 8 universal input/output 6-button
MicroScan xTalk Controller 6-button